Wallace Performance LTD use a Dastek 4WD rolling road for mapping vehicles in a safe controlled environment, in our custom built dyno cell.
Key information on our dyno;-
Using state-of-the-art hardware and software, Dastek's Dynamometer allows the user to simulate various road and track conditions, without the need for labour intensive and time consuming road testing. The necessity for high speed road testing is also eliminated as Dastek's Dynamometer allows the tuner to capture accurate technical data, such as power outputs, engine torque, boost pressure and air:fuel ratio, all in the safety of our facility.
Dastek dynamometers give the tuner the ability to quickly identify engine faults, confidently optimize control systems and accurately compare vehicle spec and modifications.
The data print outs also allow the tuner to visually demonstrate to the customer the result of the work undertaken, or of that required to achieve optimum performance.
The Dastek Dynamometer is extremely sensitive: it can detect a change as minute as the alternator drawing additional power from the engine, to compensate for vehicles interior heater fan being switched on!
Dastek's Dynamometer uses sophisticated digital processors which give exceptional speed control. The need for heavy electrical damping in the load cell output - as required in most chassis dynamometers - is not need when using Dastek's Dynamometer. Unlike other dynamometers that use ABS-type speed pick-ups (100 signals per revolution), Dastek's Dynamometers use high resolution shaft encoders, which give 500 digital pulses per revolution, and the very best in temperature compensated load cells.
Further more Dastek's Dynamometer uses sophisticated digital processors, which provide exceptional speed control, thus negating the need for heavy electrical damping, of the load cell output.
For more information and technical data, please visit the Dastek site.